What Are The Attributes That Make TMT Bars Resist Natural Disasters?

Natural disasters and calamities are “inevitable forces of nature” and can strike without any provocation. With no prior warning or alarm, these challenges pose a great risk to loss of life and property. As prevention is the best remedy, it becomes imperative to follow the ideal set of instructions beforehand that will serve as an assurance of safety when the disaster strikes.    

In building construction and infrastructure development, meticulous calculations and precise forecasting is must to be followed so as to ensure optimum protection of structures against natural disasters.

India being geographically prone to natural-disasters demands a greater extent of consideration of disaster-resistant construction techniques and being an active seismic zone, design and construction of structures must be conducted while following all the guidelines.   

How do TMT Steel Bars protect buildings against natural disasters?  

Reinforced Concrete Construction or RCC is accoladed to be the best reliable and enduring method of building developmentwhich presents a better scope of safety against calamities. Involving steel reinforcement of concrete, this technique employs use of Steel TMT Sarias as produced across myriad grades by the 500 Grade TMT Manufacturer in Bhiwadi.   

Thermo Mechanical Treatment of Steel Bars allows them to have better strength as well as and balance of flexibility and elongation. TMT Bars impart maximum support, stability and protection to structures so as to make them capable of resisting natural disasters.       

Earthquakes and floods are the calamities that most areas in India are prone to. Let us discuss how use of Steel TMT Bars can prevent building structure damages due to the same -    

Earthquake protection from TMT Bars  

Categorized as a prime natural calamity, earthquakes produce forces that risk serious damage to building structures and have resulted in great loss of life.7 STAR TMT Bars Manufacturer Bhiwadi offers seismic resistant steel sarias with high ductility as well as bendability allowing for optimum resistance against the earthquake forces. These TMT Rods allow the building structures to best absorb the vibrations and shakes.

The ductile and flexible nature of the TMT Steel Bars helps resist the effects of earthquakes and thus prevents loss of life as well as property.     

Preventing damage of Floods with TMT Steel    

The recurring spells of rain during the monsoons and spring season make many states in India prone to severe degrees of flooding. Rain and floods threaten to cause serious wear and tear to structures and also risk damage due to prolonged exposure to water. While the forces of flooding cause instant damage, corrosion occurring due to water contact brings long-term damages to buildings.   

In order to prevent the same, use of corrosion resistant resistant Steel TMT Bars as offered by Shri Rathi Group is advised.

Having been in this domain from nearly the past two decades, 7 STAR follows Temp core technology processes to offer its buyers the best features and advantages from its myriad grades of TMT Steel Sarias.         

Ribs and Lugs in TMT Bars. What they are and Why they are Needed?

Even upon a slight examination of the TMT Steel Bars, one notices a pattern of rings and lines that cover the entire length of the rods. If you are of the thought that these are just to enhance the “appearance” of the steel bars, then you are wrong. These ribs and lugs are as much functional as aesthetic they might seem.

Occurring at regular intervals along the length of TMT Bars, the rings are called as “Ribs” and the lines are known as “Lugs”. They can be found in TMT Bars of all grades. As the core function of a steel TMT bar remains to impart added strength to abuilding structure, these ribs and lugs play an essential role in offering the same benefit as well. 

TMT Steel Bars are an imperative choice in enhancing the overall strength and load resistance in building structures. These features of ribs and lugs play into deriving the best functional advantages from these reinforcement elements and thus make your buildings safe and enduring.    

What functions do Ribs and Lugs serve in TMT Bars?  

The patterns of rings that occur at regular intervals along the Fe-600 Grade TMT Bars in Amritsar and other grades of steel rods are known as “Ribs” and they enhance the bonding strength between the TMT Steel Rods and concrete. By ensuring better grip in concrete and preventing slippage during construction, these ribs increase the overall traction between the rods and concrete resulting in better structural stability.     

By providing enhanced anchorage in concrete structures, these “transverse ribs ”help in even load distribution as well as heavy load bearing in construction.

“Lugs” on TMT Bars help reinforce the ribbing patterns and facilitate higher interlocking of bonds between the concrete and steel bars. These lugs or “longitudinal ribs” on the steel rods as they are also termed give the structures optimum stability and strength while enhancing the lifespan as well.   

Owing to the improvements in strength of bonds formed with concrete, these ribs and lugs together by maintaining high anchorage help derive the maximum yield strength and flexibility in steel TMT bars. 

Enhanced features with precise patterns of ribs and lugs   

Stated below are features that these ribs and lugs present to steel TMT bars -  

• Enhanced stability  
• Increased bending capacity    
• Improved bonding with concrete 
• Seismic resistance enhancement   
• Minimum concrete slippage 
• Reinforced anti-corrosion coating 
• Better longevity  

7 STAR Shri Rathi Group is one of the top Structural Steel Suppliers in Amritsar and offers an advanced range of Steel TMT Bars that embody the best precision in design, manufacturing and cost-effectiveness as well.

How does Corrosion Impact Concrete Construction and How to Counter it?

Among the many challenges faced by engineers and architects, corrosion of RCC elements, particularly Structural Steel has been the prime hindrance in deriving long-lasting and low-maintenance structures.

While a many might think that corrosion merely effects structural durability, it is a fact that the mechanical and structural properties of building components can directly as well as indirectly be impacted with structural steel corrosion.

Being a construction staple for decades, concrete is a popular choice of building technology that poses advanced advantages. Yet there are a few challenges that need addressing so as to derive the strongest, safest and the best lasting structures.  

Corrosion of Structural Steel    

Steel is the most preferred choice of metal to be used as reinforcement in concrete. But over time, the metal gets more and more susceptible to lose its strength, volume and longevity due to corrosion.

Occurring due to exposure of steel bars to saline water, chlorides and other elements, corrosion and rusting of structural steel is a big negative in construction and can make the entire building lose its strength and safety.

How corrosion impacts building structures?  

The effects of structural steel corrosion deteriorate the load bearing capacity, durability as well as service span of a building. Here is how your building gets effected with corrosion -     

•   Compromised strength  

Structural strength of a building can be severely reduced due to corrosion of structural steel. As the metal gets eaten away, its load bearing is affected and the overall structure loses its strength.

•   Reduced flexibility 

Use of Structural Steel in RCC construction has a prime aim to impart flexibility to the building in order to counter seismic forces as various dynamic loads. Corrosion also impacts this property and makes a building less flexible.   

•      Fatigue  

With corrosion of structural steel, a building structure may suffer from fatigue and this accelerates crack propagation thus compromising the entire structure’s strength. 

How to counter corrosion of Structural Steel in construction?     

Relying on quality materials and opting for the Thermo Mechanically Treated Steel Bars as offered by the Top TMT bar manufacturer Panipat helps alleviate the chances of corrosion and eliminate risks to the structure significantly.

These TMT Bars are manufactured through advanced Temp core technology processes and have been formed of the purest sourced steel resources. They are less prone to corrosion and their minimal vulnerability to rusting helps achieve the desired strength and longevity from buildings.

7 STAR Shri Rathi Group is accoladed to be one of the Top Structural Steel Suppliers in Panipat and has almost two decades of unhindered recognition as the best manufacturer of corrosion resistant thermo mechanically treated structural steel bars.       

Plan to Construct Your Home? Here are the Tips to Remember!

For many, construction of a home remains to be a top priority and a major striving in life. It serves endless comfort and pleasure to have your very own place to call home and this goal demands a lot of effort, hard-work and planning to be achieved.

With building a home being such an important task, one needs to have all planning and proper guidance in executing the same and have a perfect realization of your desires to own a dream house. 

Before going ahead with constructing your new home, you need to remember the following essential tips -  

• Construction budget    

What you want to build and how you want to build is all dependent on a single major imperative -the budget. The amount you are willing to spend determines the scale as well as facilities of the construction project. It is important to conduct proper analysis and planning on deciding the budget so that you achieve the best desired comfort, aesthetics as well as ergonomics from your home all within the prescribed budget range.  

• Choice of materials  

What comprises to be your building structure has the best say in its strength, safety and longevity. Choosing the right material resources for building your home is something that needs to be primarily considered and this will have a lasting impact on how well your home will serve you. Your budget should incorporate the ideal quality materials and with the avail of 7 STAR Customized TMT Bars in Karnal, you get to achieve a perfect balance between performance and price.    

• Access to essentials      

The location is a prime factor in defining the day-to-day ease you experience at your home. You should plan on constructing your home at a destination with easy access to essential facilities and services like electricity, water, network and other supplies. These factors play a major role in determining the long-term suitability of location and comfort.   

• Aesthetics  

The look and design of your home is purely a factor of form and yet it must balance the functional excellence of your project. While you plan on occupying your dream home for many years, it must look and feel right for you and your family. Ideal choices in design can be made possible with use of flexible materials such as the TMT Steel Rods as offered by Cut to Length TMT Barssupplier in Karnal which allow you to get the exact length of Bars possessing maximum flexibility.    

• Avail the right professional help 

A lot of services and professionals go into building a house and hiring the ideal choices makes a significant impact on the overall strength, durability, safety and beauty of your home.

7 STAR Shri Rathi Group has an expertise of almost two decades in manufacture and supply of Customised TMT Bars in Karnal that have been a top priority for buyers. Owing to their cutting-edge features, they make buildings strong, safe and enduring.